In 2022, as the technology of portable weapons such as rifles continue to upgrade, the choice of body armor becomes critical. This article will tell you what points you need to pay attention to when purchasing rifle plate body armor, which will save you a lot of time and energy.
1. Ballistic plates VS soft body armor
As we all know, body armor is a kind of bulletproof equipment used to protect the torso. It generally has two categories: soft armor and hard armor. Hard armor includes ballistic plates (also known as plate carrier). Most soft armor can deal with NIJ (National Institute of Justice) II, IIA, and IIIA classes, i.e. pistol threats. We’ll get into the meaning of this level later.
Although soft body armor has the advantages of better wearing comfort and lighter weight, soft body armor is not enough to deal with rifle threats with high penetration. At this time, you need to choose ballistic plates for protection. Ballistic plates generally come in two materials. Two of the most common materials are ceramic and polyethylene. Ceramic plates have a higher weight but are extremely protective. Another important issue is that it can only protect a limited number of shots, and each hit weakens or damages its protection until it can no longer protect your life. Polyethylene board can overcome these shortcomings. Polyethylene sheet does not break after bullet impact, it is more flexible and lighter than ceramic, making it the first choice for military and law enforcement forces.
2. Level of Rifle Plate Body Armor
Ballistic plates levels are broken down into seven threat levels:
●Level II
●Level IIIA
●Level III
●Level IV
●Spike Level 1dsa
●Spike Level 2
●Spike Level 3
Level II and IIIA are soft armor designed to stop pistol bullets, Class III and IV are hard to plate armor designed to stop rifle bullets, and three spiked classes protect against simple bladed weapons. The threat level is the most critical indicator of body armor. The National Institute of Justice (NIJ) administers a certification program that tells buyers what to expect from their armor.
NIJ’s system classifies body armor into different threat levels, from II to IV. When choosing rifle body armor, you need to select at least LEVEL III body armor. LEVEL III body armor can stop six spaced impacts of a 7.62X51MM NATO (full metal casing) traveling at 2,750 feet per second. However, slower or smaller caliber bullet varieties still have the potential to penetrate armor. It depends on the body armor material, so you need to choose carefully. A reliable Rifle Plate Factory will clearly tell you the advantages and disadvantages of the products.
A higher grade, Class IV body armor, which is the highest rifle plate rating under the NIJ Personal Body Armor specification. But it is designed to stop a single hit of the 7.62MM AP bullet, which is vastly different from the tier III’s six hits. Therefore, although the level of IV is higher than that of III, it may not necessarily have better protection performance in actual use. Level III lightweight Rifle Plate is popular today. You can browse them in hwinbulletproof. Hwin provides various types of body armor including rifle pate, soft plate, bulletproof vest and etc. You can find a suitable one in sites.
3. Types of Rifle Plate Body Armor
There are many types of rifle body armor, the most common types of rifle body armor are:：ceramic plate-based systems, steel plate with spall fragmentation protective coating, and hard fiber-based laminate systems.
For ceramic plate-based systems， Its structure generally has four layers, as shown below.
Each component in a composite system has a specific function. The hard ceramic layer reduces the velocity of the projectile and micronizes the projectile. The resulting low mass and significant velocity reduction of these residual fragments is completely absorbed in the composite substrate by elastic/plastic deformation.
The cheapest and heaviest is steel, but it’s also the most dangerous because the armor deflects bullets or bullet fragments in all directions on impact, sending the fragments flying in random directions at high speed, which can have serious consequences
For hard fiber-based laminate systems. Fiber Metal Laminate (FML) combines the high load-bearing strength and impact resistance of metal with the excellent fatigue properties, high strength and stiffness, and corrosion resistance of fiber-reinforced polymers, thereby overcoming most of the shortcomings of a single monolithic sheet of material. This type of material has excellent properties and is often used in rifle body armor.
4. Best china manufacturer of bulletproof vest
With years’ of development, H Win has already become one of the most important rifle plate china manufacturers and R&D centers in the composite material industry in the world..Solid research strength, first-class processing equipment and advanced testing equipment, enable our products to get good reputations in the market for its outstanding performance and stable quality, our protective products are exported abroad.
Conclusion
After reading this article, you must have a better understanding of Rifle Plate Body Armor. If you want to learn more about it or purchase body armor, you can go to HWIN. Feel free to contact us!